| Volumes and Issues Contents of Issue 1 |
www.drink-water-eng-sci.net/4/1/2011/
doi:10.5194/dwes-4-1-2011
© Author(s) 2011. This work is distributed
under the Creative Commons Attribution 3.0 License.
Metals releases and disinfection byproduct formation in domestic wells following shock chlorination
University of Nevada, Department of Natural Resources and Environmental Science, MS 370/FA 132, 1664 N. Virginia Street, Reno, NV 89557, USA
Abstract. Shock chlorination is used for rapid disinfection to control pathogens and nuisance bacteria in domestic wells. A typical shock chlorination procedure involves adding sodium hypochlorite in liquid bleach solutions to achieve concentrations of free chlorine of up to 200 mg L−1 in the standing water of a well. The change in pH and oxidation potential may bring trace metals from aquifer materials into solution and chlorine may react with dissolved organic carbon to form disinfection byproducts. We carried out experiments with four wells to observe and determine the persistence of increased concentrations of metals and disinfection byproducts. Water samples from shock chlorinated wells were analyzed for Pb, Cu, As, radionuclides and disinfection byproducts (haloacetic acids and trihalomethanes), immediately prior to treatment, after sufficient treatment time with chlorine had elapsed, and at intervals determined by the number of casing volumes purged, for up to four times the well casing volume.
Elevated concentrations of lead and copper dissipated in proportion to free chlorine (measured semi-quantitatively) during the purging process. Trihalomethanes and haloacetic acids were formed in wells during disinfection. In one of two wells tested, disinfection byproducts dissipated in proportion to free chlorine during purging. However, one well retained disinfection byproducts and free chlorine after 4 WV had been purged. Although metals returned to background concentrations in this well, disinfection byproducts remained elevated, though below the MCL. This may have been due to well construction characteristics and interactions with aquifer materials. Simple chlorine test strips may be a useful method for indicating when purging is adequate to remove metals and disinfection by-products mobilized and formed by shock chlorination.
Final Revised Paper (PDF, 256 KB) Discussion Paper (DWESD)
Citation: Walker, M. and Newman, J.: Metals releases and disinfection byproduct formation in domestic wells following shock chlorination, Drink. Water Eng. Sci., 4, 1-8, doi:10.5194/dwes-4-1-2011, 2011. Bibtex EndNote Reference Manager XML
Search DWES
News
- After a successful cooperation in 2009, we are proud to publish a selection of the best papers of CCWI 2011 in a special issue.
- DWES publishes the best papers of the young scientists workshop of the Amsterdam International Water Week.
- DWES publishes the best papers of the first Baltic Water conference 2011.
- Overview of Scheduled Special Issues